The automatic argon arc (plasma) straight seam welding machine is mainly used for the butt straight seam automatic welding of cylinders and panels of stainless steel, iron, aluminum, brass and other metals. Due to the use of automatic walking mechanism, the weld is well formed and beautiful.

1.氣動夾緊裝置采用特殊銅材壓腳。

1. The pneumatic clamping device adopts special copper presser foot.

2.背襯可根據焊接材料的厚度進行調整及選擇：背襯能保證提供穩定的氣體保護確保單面焊，雙面成形。

2. The backing can be adjusted and selected according to the thickness of welding materials: the backing can ensure stable gas protection, single-sided welding and double-sided forming.

3.縱向焊接的行走由測速直流馬達驅動，行走穩定。

3. The walking of longitudinal welding is driven by speed measuring DC motor, and the walking is stable.

4.焊槍可氣動自動定位，也可以通過十字滑塊進行手工調整。

4. The welding gun can be automatically positioned pneumatically or manually adjusted through the cross slider.

使用焊接設備的優點：

Advantages of using welding equipment:

一焊接設備可以提高焊接效率。

A welding equipment can improve the welding efficiency.

焊接設備響應時間短，動作迅速，焊接速度快遠高于手工焊接，專機運轉過程中不停頓不休息，但工人上班不可能做到不休息，同時工人效率也受到心情因素影響，工人會請假，發呆，聊天，加班要加班費等，而焊接設備沒有上述問題，只要保證水電氣等條件，可以持續工作，設備性能穩定，可以做到4-5年，無形中提高了企業的生產效率。

The response time of welding equipment is short, the action is fast, and the welding speed is much higher than that of manual welding. The special machine does not stop and rest during operation, but it is impossible for workers to go to work without rest. At the same time, the efficiency of workers is also affected by mood factors. Workers will ask for leave, daze, chat, overtime pay, etc. while the welding equipment does not have the above problems, as long as water, electricity and other conditions are guaranteed, It can work continuously with stable equipment performance for 4-5 years, which virtually improves the production efficiency of the enterprise.

二焊接設備可以提高產品質量。

Second, welding equipment can improve product quality.

焊接設備只要給出焊接參數，如電流，電壓，焊接速度及焊接干伸長度等對焊接結果起決定作用，采用焊接設備對每條焊縫的焊接參數都是恒定的，焊縫質量受人的因素影響較小，降低了對工人操作技術要求，因此焊接質量是穩定的，從而保證我們產品的質量。

As long as the welding equipment gives the welding parameters, such as current, voltage, welding speed and welding dry extension length, it plays a decisive role in the welding results. The welding parameters of each weld with the welding equipment are constant, and the weld quality is less affected by human factors, which reduces the technical requirements for workers' operation. Therefore, the welding quality is stable, so as to ensure the quality of our products.

三設備焊接可降低企業成本。

Third, equipment welding can reduce enterprise costs.

焊接設備降低企業成本主要體現在規?；a中，一臺焊接設備可以替代2-4名工人，根據企業情況不同，設備沒有疲勞，可24小時連續生產，隨著高速焊接技術應用，使用設備焊接，成本降低更加明顯。

The reduction of enterprise cost by welding equipment is mainly reflected in large-scale production. One welding equipment can replace 2-4 workers. According to different enterprise conditions, the equipment has no fatigue and can be produced continuously 24 hours a day. With the application of high-speed welding technology, the cost reduction is more obvious by using equipment welding.

四設備焊接容易安排生產計劃。

IV. equipment welding is easy to arrange production plan.

由于設備可重復性高，只要給定參數，就會永遠按照指令去工作，因此焊接產品周期明確容易控制產品質量。設備的生產節拍是固定的，因此安排生產計劃非常明確。準確的生產計劃可以使企業的生產效率資源的綜合利用做到更大化。

Due to the high repeatability of the equipment, as long as the parameters are given, it will always work according to the instructions. Therefore, the welding product cycle is clear and easy to control the product quality. The production beat of the equipment is fixed, so the arrangement of production plan is very clear. Accurate production planning can make the production efficiency of enterprises and the comprehensive utilization of resources greater.

五焊接設備可以把工人從各種惡劣環境中解救出來。

V. welding equipment can rescue workers from various harsh environments.

焊接現場溫度高，空氣差，還存在輻射等問題，這些嚴重影響工人的身心健康，用焊接設備就沒有上述問題，只需要上下料就可以，從而使工人擺脫惡劣的焊接環境。

The welding site has high temperature, poor air, radiation and other problems, which seriously affect the physical and mental health of workers. There are no above problems with welding equipment, just loading and unloading, so as to make workers get rid of the bad welding environment.

六焊接設備可以提高企業形象。

Vi. welding equipment can improve the corporate image.

的生產設備，體現了企業的加工能力和科研能力，使我們的企業形象上升了一個臺階，使客戶更加信賴我們，從而提高我們的企業的競爭力。

Advanced production equipment reflects the advanced processing capacity and scientific research ability of the enterprise, raises our corporate image to a higher level, and makes customers trust us more, so as to improve the competitiveness of our enterprise.

本文由山東數控焊接設備為您提供，我們的網站是：http://m.oimhc.com我們將以全心全意的熱情為您提供服務，歡迎您的訪問

This article is provided by Shandong CNC welding equipment. Our website is: http://m.oimhc.com We will serve you with wholehearted enthusiasm. Welcome to visit