想要保證焊接機器人的工作質量，離不開技術人員對設備的應用方法以及對設備的保養，畢竟一個劣質的設備，生產出的產品質量也是無法保證的。那么使用焊接機器人保證其質量要做到什么？山東焊接專機廠家為您講解。

To ensure the working quality of the welding robot, it is necessary for technicians to apply the equipment and maintain the equipment. After all, a low-quality equipment can not guarantee the quality of the products produced. What should be done to ensure the quality of welding robots? Shandong welding machine manufacturer will explain to you.

一、焊接機器人檢查和維護

1、 Inspection and maintenance of welding robot

1、送絲機構。包括送絲力是否正常，送絲管是否受損，是否有異常報警。

1. Wire feed mechanism. Including whether the wire feeding force is normal, whether the wire feeding tube is damaged, and whether there is abnormal alarm.

2、檢查氣流是否正常。

2. Check whether the air flow is normal.

3、割炬保護系統是否正常。等等。

3. Whether the cutting torch protection system is normal. wait.

二、周檢查和維護

2、 Weekly inspection and maintenance

1、擦洗焊接機器人的軸。

1. Scrub the shaft of the welding robot.

2、檢查TCP的準確性。

2. Check the accuracy of TCP.

3、檢查殘留物的油位。

3. Check the oil level of the residue.

4、檢查機器人各軸的零位是否準確。等等。

4. Check whether the zero position of each axis of the robot is accurate. wait.

三、焊接機器人每月檢查和維護

3、 Monthly inspection and maintenance of welding robot

1、潤滑機器人的軸。其中，16軸為白色，帶潤滑油。

1. Lubricate the axis of the robot. Among them, shafts 1 to 6 are white with lubricating oil.

2、帶黃油的RTS導軌的RP定位器和紅色噴嘴。

2. RP positioner and red nozzle for RTS rail with grease.

3、RP定位器上的藍色潤滑脂和灰色導電油脂。等等。

3. Blue grease and grey conductive grease on the RP positioner. wait.

8.除1-8的工作外，完成每周檢查的所有項目。

8. In addition to the work in 1-8, complete all items checked every week.

9、設備故障時，應立即維修，報告維修情況，詳細說明故障前設備的狀況和運行情況，并協助維修人員進行檢查，順利恢復生產。主管將對設備保養情況進行不定期抽查。操作者在每班交接時仔細檢查設備狀況是否完好，記錄好各班設備運行情況。

9. In case of equipment failure, it is required to repair immediately, report the repair situation, specify the condition and operation of the equipment before the failure, and assist the maintenance personnel in inspection to successfully resume production. The supervisor will conduct random inspection on equipment maintenance. The operator shall carefully check whether the equipment is in good condition during each shift handover, and record the equipment operation of each shift.

設備故障時，維修部門應當及時反映設備狀況，包括故障時間、故障現象和故障前后情況，經營者應當向維修人員詳細說明，以糾正和快速排除故障。更多有關設備的事項，就來關注我們網站http://m.oimhc.com！

In case of equipment failure, the maintenance department shall timely reflect the condition of the equipment, including the failure time, failure phenomenon and the situation before and after the failure. The operator shall explain in detail to the maintenance personnel to correct and quickly eliminate the failure. For more information about equipment, please follow our website http://m.oimhc.com ！